Update History:
1.25	Minor bug fix
	Fix a hanging-on note problem in Demo songs
1.26	Improve crash choke
1.27	Update parameters for new ride pad (kits using new ride cymbal)
	Metro now acts like an on/off switch button, easier to operate
	Fixed a problem cause ride bell to trigger ride edge sound
1.28	Adapts firmware to new cymbals (kits using new crash hihat and ride cymbal)
1.29 	Fixed Hihat miss triggering
	Slightly increase half-open hihat range
	Fixed a bug on ReverbTime not working issue

1.26b	Fixed note send problem for old cymbals works for all old cymbal set
1.26c	Fixed rim parameter not being saved problem
1.26d	Parallel fix for old cymbals, catches up to 2.06

1.27b	Fixed note send problem for old cymbals works for new ride cymbal set
1.27d	Parallel fix for old cymbals, catches up to 2.06


2.00	Sam 5000 Chip support 
2.01	Crash bow triggerred when play edge
	Fader display problem
	Volume load problem when switching kits
2.02	Fixed note send not being saved when rebooted
	Improved Hihat performance
2.03	Prevents the mesh from being triggered twice in very short time
2.04	Fixed note send not being saved when rebooted
2.05	Fixed rim parameters not being saved when rebooted
2.06	Fixed some problem when recording midi - wrong note off on hihat and occasional wrong note length

3.02	Firmware for new soundbank
3.03	Fixed a USB problem which might cause freeze
3.04	Made loop function much easier to use
	Metronome voice and volume can be saved now
3.05	Add Yooth commnuciation protocal
3.11	Support New 13" Hihat with stand 
	Fixed a problem that reverb cannot be disabled
3.12	Fixed a frezze bug in FX set menu
3.13	Fixed a blue tooth midi problem on 3.12
3.15	Fixed a demo song sync issue
	Fixed a crash edge trigger problem	
3.16	Fixed crash2 edge trigger bug
	Now possible todisable auto shutdown function by pressing [PAGE UP] and [PAGE DOWN] when power on 
3.17	CrashR Velocity default value +20
3.18	Fixed a possible rare situation that rim is triggered while playing mesh head
	Raised trigger threshold while selecting drum in setup or edit. In this case when you play hard, it won't select another drum
3.19	Fixed a reverb & midi initialize issue on some units
3.20	Fixed 2 situations that xstick/rim is triggered while playing snare/tom head very fast(head 0 or lower than rim)
	RimVelocity value read error when power on
	Easier to select X-Stick in menu
3.21	Fixed a possible freeze problem when selecting voice(hotfix for 3.20)
3.22	Fixed a problem when strike tom1 rim hard, tom2 will be selected in menu
3.23	XD1000 Tom Rim velocity curve optimized(mesh with no foam base build)
3.24	Fix a problem when striking Tom rim very hard, Tom head is triggered
3.25	New algorithm for mesh pads
3.26	Improved algorithm with better response and less unwanted notes.
3.27	Adapted improved algorithm on all models
	Fix a problem when strike mesh head hard, rimshot will be triggered
3.28	Fixed error triggering by circuit interference in some circumstances 
3.29	Fixed a tom sound when initialzing is finished
3.30	Improved crosstalk setup
3.31	Fixed a freeze bug when setting up Xtalk
	Reduced Hihat missing note when playing fast
3.32	Improve crosstalk for Crash and Ride when played together with other pads
3.33	Fixed a missing HH triggering problem when playing fast on high velocity on 450 and 750
3.34	When releasing cymbal edge, aftertouch 0 will be sent
3.35	Extended auto quit time for Metronome menu
3.36	Fixed missing note off on tom rims  
	Fixed a metronome sync problem when song pauses
3.37	Increased Peak Decay for new smoother mesh head, which will reduce missing notes
3.38	Reduce sensitivity of Snare Rim
3.39	Adapted new algorithm on kick
3.40	Peak Decay on Kick increased from 6 to 8
3.41	Tom Rimvelocity  0 -> -30, snarerim sensitivity 60 -> 40 
3.42	Tom Rim Sensitivity 60
3.43	Adjust EQ, synth volume for KS-10
3.44	Improve EQ, synth volume for KS-10

4.00	New system format
	Introduced rim modifier & decay
	Introduced open/close point
	Improved hihat pedal process(pedal chick), must used with DREAM pedal chick mute firmware
	Pedal velocity is now calculated
	Firmware and patchdata are seperated and are both with version number
4.01	Crosstalk bug fix(rim added) and save/display improved 
	Crosstalk function needs to be confirmed with [ENTER] before activating
	Calibration needs to be confirmed with [ENTER]
	Xtalk & soundbank version can now be checked in test mode(lower line)
4.02	Fixed a bug that fader gain saves wrong value when saving in setup menu
4.03	Playing any pad in setup menu does not jump to advance settings now
4.04	Improved handshaking with DREAM on startup to prevent freezing
4.05	Improved initialization to prevent stuck on 'Initializing...' screen
	Removed an instance that causes fail to enter test mode
4.06	Removed Master Tune
4.07	Recording now uses a float size
	Fixed some bugs in recording
	Added  Xtalk tool support
	Added a hard reset, by pressing both [setup] [mode] while power on 
4.08	Added a definition of USB ID
4.09	Added a DREAM firmware version display in test mode, followed by soundbank ver.
4.10	Fixed USB device name
4.11	Force forbids update in normal mode
	Fixed a Xtalk value overflow issue
	Added Bar Trigger support(must work with PCB update)
	Auto power off also detects button actions now
	Fixed a velocity/AD bug in Xtalk calculation
	CRASH2 and TOM4 are renamed to EXT1 and EXT2
	Removed a force triggering case on HiHat
4.12	Fixed a display mistake on fader Tom volume
	Fixed initial state of fader alter to VOL
4.13	Fixed a problem that when you play cymbals fast, triggering on other drums cannot be canceled by Xtalk
4.14	Improved Rim Modifier process, positive value now works in linear, ascending for head descending for rim
	Fixed a instance that cymbal reads head xtalk value instead of rim value
	It is possible to use [DRUM] & [ACCOMP] buttons to select previous/next drum in menu 
4.15	Improved how modifiers work, it's more flexible now
	Fixed an overflow bug in modifier
4.16	Fixed a issue that could slow down the triggering of mesh rim
4.17	Fixed a bug that could output max cymbal velocity by mistake
4.18	Added Fader Mode function
	Fixed a bug that sensetime is not working on snare head 
4.19	Memorizes the kit number before power off
	Added an auto shut down timer in setup menu
	Fixed a case that faders are at 0 when power on if fader mode is cancel/lock
4.20	Support Kit Editor
4.21	Fixed a bug when recording is full
	Cymbal choke aftertouch are sent on all notes on the same cymbal now 
4.22	Added a sound bank checksum in test mode (must work with DREAM update 0.3)
	Deleted malfunctioning distortion parameter
4.23	Fixed a bug that may jump to song display when playing kit "Loop"
4.24	Fixed a bug in loop play repeat
4.25	Improved a case of no triggering when playing cross stick 
4.26	Fixed a bug that tempo will reset when song looped
4.27	Improved hitting ride bell and bow fast repeatedly that bell is triggered instead of bow
	Fixed incorrect tempo while playing song before entering PATTERN
4.28	Fixed a spiflash bug which may lead to freeze in initializing
4.29	Improved mesh head fast playing that sometimes crossstick is triggered
______________________________________
